Pool chemicals · hth

hth briquettes 25 kg, 70%, in 7 g tablets, BRIQUETTE unstabilized chlorine, calcium hypochlorite, USA

SKU	30859
Product form	7 g briquettes
Product dosage	20 briquettes per 10 m3
Shelf life	3 years from the date of manufacture
Active chlorine content, not less than	70%
Weight	25 kg
Country of manufacture	USA

Calcium hypochlorite briquettes in 7 g tablets (for EASIFLO), 25 kg BRIQUETTE EASIFLO 70% - fast-dissolving chlorine in 7 g Briquette briquettes. A calcium hypochlorite-based product. Kills bacteria, viruses and fungi in water, including Legionella pneumophila, the bacterium that causes a dangerous pneumonia known as Legionnaires' disease. Does not cause excess chlorine stabilization. Serves as a refill for the Easiflo HTH feeder.

Composition: contains hydrated calcium hypochlorite, unstabilized chlorine

Properties:

- 7 g briquettes dissolve quickly in water;

- average free chlorine content - about 70%;

- the product does not create dust during use;

- contains an anti-limescale agent;

- the presence of isocyanuric acid (stabilizer) is completely excluded;

- suitable for any filtration units.

- measuring container included.

Directions for use:

Place the product in the skimmer at a rate of 20 tablets per 10 m3 of water, if the skimmer does not contain stabilized chlorine. Thereafter, approximately every 4-5 days, add briquettes so that the free chlorine level is maintained at 2 mg/L (determined using DPD1 tablets).

The daily dose of the product is 150-200 g per 100 m3 of water, depending on the number of bathers, exposure to ultraviolet rays and water agitation (slides, counter-current, etc.), but usage can be reduced by adding stabiliser, especially in outdoor pools.

In public pools: it is recommended to use the hth Easiflo feeder or a dosing pump with a distribution tank. The Easiflo feeder is better, as it holds 15 kg of product and provides longer autonomous operation, whereas a distribution tank can hold only 1-1.5 kg of product.

Daily rate of use - 0.5-1.0 kg per 100 m3 of water. The active chlorine content should be constantly maintained between 0.4 and 1.4 mg/L. If the pool water is stabilized, the active chlorine content should be maintained at a minimum of 2 mg/L, and the stabilizer content should not exceed 75 mg/L (ideally: 25 to 50 mg/L). The pH level should always be between 7.0 and 7.4.

Check availability

Our manager will confirm availability and delivery time after you place the order.