Heating and heat pumps · Pahlen

Pahlen electric heater 12 kW Aqua compact

SKU	141603
Connection	50 mm
Power	12 kW
Voltage	380 V
Maximum pressure	2.5 bar
Pool volume	up to 60 m3
Heater length	540 mm
Maximum flow	90 L/min
Heater height	200 mm
Country of manufacture	Sweden

The electric pool heater is made of thermoplastic for extra strength. Incoloy 825 stainless steel is used to manufacture the heating element. It is supplied with a built-in thermostat for regulating the pool temperature, as well as a flow switch and an overheat switch. This electric heater model is extremely resistant to corrosion and to deformation from the high temperatures that occur inside the housing.

Pahlen electric heaters are easily connected to existing pool plant room systems. Water is pumped by the pool circulation pump through the electric heater, where it is heated by the heating element. All Pahlen heaters are designed for continuous water flow with pressure fluctuations.

It has a compact design, takes up little installation space and is suitable for all types of pools and spas.

Features:

• Reinforced thermoplastic housing.

• Heating element made of high-quality stainless steel.

• Built-in overheating protection.

• Plastic brackets for wall mounting.

• Six sizes: 3, 6, 9, 12, 15 and 18 kW

• Can be connected in series if required.

Electric pool heaters are made of thermoplastic for extra strength.

Heating element made of Incoloy 825 or titanium for extra safety in installations with a high risk of corrosion, such as saltwater pools. Supplied with a thermostat for adjusting pool temperature, as well as an overheat cut-out and a flow switch. Rated power 3-18 kW.

Minimum flow 90 L/min. Max. pressure: 2.5 bar. Suitable for private pools up to 100 m3.

Water flow diagram:

Overall dimensions of the 12 kW electric heater (length given in brackets)

Wiring diagram

Hydraulic resistance

Our manager will confirm the delivery time after you place the order.