Pipes and fittings · Pimtas

Elbow 45° d = 63 mm, PN16, Pimtas

SKU	502000632
Connection diameter	63 mm
Operating pressure	16 atm
Material	PVC (polyvinyl chloride)
Country of manufacture	Turkey

The elbow is designed to turn the pipe by 45 degrees.

The elbows are made of unplasticised polyvinyl chloride (PVC) and are used for cold water supply, pool construction, liquid pumping, irrigation and watering. They are also used in metallurgy, oil refining and fertiliser production.

Chemical resistance allows PVC to be used in virtually any field (pumping oil, acids, oils, solvents). Water flowing through a PVC pipeline does not change its composition or physical properties.

Optimal physical properties allow such piping to be used even in the food industry, in the production of consumer beverages, etc.

Polyvinyl chloride contains stabilizers, fillers, as well as hydrogen, chlorine and carbon. The composition easily withstands moderate temperatures and is resistant to fluid pressure and water hammer.

Advantages of PVC

Does not get dirty inside, does not rust, does not collect condensation;

-No toxicity, taste or odor; explosion-safe and fire-safe;

- Virtually zero heat loss when transporting hot mixtures;

- 100% watertight connection;

- Resistance to bacterial and fungal deposits;

-Reduced weight with the same cross-section (up to 10 times less metal);

-Can be installed outdoors, in (moderately) shifting soil, and indoors;

-Compatibility with other pipe systems (threaded or flanged connection).

Installation

Fixing is done with a special PVC adhesive, which guarantees 100% sealing and an unbreakable joint.

Check availability

Our manager will confirm availability and delivery time after you place the order.