Pool liners (PVC membrane) · OgenFlex

White membrane White 2028, 1.65, lacquered, reinforced, OgenFlex

SKU	317072028003
Roll width	1.65 m
Roll length	25 m
Liner thickness	1.5 mm
Reinforcement	Yes
Roll weight	85 kg
Country of manufacture	Israel

OgenFlex reinforced membrane has an optimal price-quality ratio, which is often decisive for the customer.

The film welds well, has good resistance to ageing and also sufficiently withstands water care products.

The OgenFlex coating has unique protective properties. Biological impregnation protects the film from fungi, spores, microorganisms and various bacteria present in the water.

It also has high mechanical strength and is resistant to ultraviolet rays and large temperature fluctuations.

The OgenFlex membrane has a reinforcing layer based on a mesh made from polystyrene fibre, which provides the maximum coefficient of mechanical resistance to possible tears and any external deformation.

Thanks to the molecular bond between the membrane's constituent ingredients, a uniform, strong, elastic covering 1.5 mm thick is formed during membrane production.

The high performance of OgenFlex film allows it to be widely used for lining swimming pools all over the world.

The company's products comply with all required quality standards: ISO 9001, environmental accreditation ISO 14001&50001, OHSAS 18001, DIN, SKZ, B.B.A., CE, ISI, CSTB, FM and RAL-GZ 716/1.

It also complies with the European REACH regulation - the regulation on chemicals and their safe use (EC 1907/2006).

The regulation concerns the registration, evaluation, authorisation and restriction of the use of chemical substances.

The products comply with the specifications of the standard (NF 5 54-803-2) EN 15836-2-2011 and, particularly pleasingly, meet the KSW recommendations (German public pools).

10-year warranty!!!

According to FINA requirements, lane markings must be of a contrasting colour and placed on the pool floor in the centre of each lane.

Width: minimum 0.2 metres, maximum 0.3 metres. Length:

46.0 meters for 50-meter pools / 21.0 meters for 25-meter pools.

Each lane line must end at a distance of 2.0* metres from the end wall of the pool with a distinct

a cross line 1.0 meter long and of the same width as the lane line. Target lines shall be placed on the end walls or on the touch panels,

in the centre of each lane, of the same width as the lane lines. * Pool length tolerances must be taken into account.

They must extend continuously from the edge of the deck (coping) to the pool floor for a maximum of 3 metres. A transverse line 0.5 metres long must

be placed 0.3 metres below the water surface, measured to the centre point of the transverse line.

For 50- and 25-metre pools built after 1 January 2006, cross lines 0.5 metres long must be placed at the 15-metre mark from each

end of the pool. After October 2013, this value will be measured from the end wall to the center point of the cross line.

Our manager will confirm the delivery time after you place the order.