Covers and roller covers · DEL

Underwater roller cover ROLLINSIDE 1, 9x20 m or 10x17 m max (France)

SKU	ROLLINSIDE1
Maximum pool size	9x20 m or 10x17 m
Cover type	Roller, stationary, underwater
Winding type	Automatic - electric
Motor	External, inside the shaft
Electrolysis unit control module	Option
Choice of slat color	Yes
Accessories for overflow pools	Option
Safety locks for skimmer pool	Yes
Remote control	Yes
Underwater protective panel	PVC
Warranty	2 years
Country of manufacture	France

The ROLLINSIDE 1 automatic pool roller cover is an underwater-mounted model designed for pools up to 9x20 m or 10x17 m, supplied with two beams and one panel. The motor can be mounted on the floor or in the concrete steps of the pool. Thanks to surface-mounted load-bearing parts, the ROLLINSIDE 1 winding shaft can be installed even in an existing pool without compromising the integrity of the pool basin.

Each ROLLINSIDE 1 model is made to order for each pool size.

Purpose of the automatic cover:

Accident prevention. Safety of children and pets. Even when stepping on the very edge of the roller cover, a child or animal will remain on its surface.

Reduced evaporation;

Heat retention.

Pushlock Automatic automatic locks

Advantages of DEL roller covers:

Manufacturing and assembly take place at a single factory.

A fully complete product is delivered to the site and only needs to be installed;

The cover comes with everything needed for assembly and installation;

Quality components; DEL means quality automation and all components;

Sealed slats;

100% made in France.

The ROLLINSIDE 1 cover motor can be located:

behind the pool shell;

inside the shaft, cable inside the pool shell;

inside the shaft, cable behind the pool shell.

The motor power is selected individually depending on the depth at which it will be installed. The greater the depth, the higher the motor power.

Every ROLLINSIDE 1 cover comes with guide rollers that prevent slat wear.

The slats of DEL automatic electric roller covers are sealed and hollow. They are much lighter than similar products from other manufacturers on the market: they have better buoyancy and do not sink, as a result of which they perform the function of heat retention and evaporation reduction better and hold a person who accidentally falls into the pool better.

Decorative end caps are a special element that covers the sealing plug at the end of the slat, giving the slats a finished, aesthetic appearance. Algae and mold do not develop in their ends.

The roller cover is controlled remotely using a modern remote control. The roller covers can be powered autonomously from solar panels. A battery charge from the solar panels is enough for more than 60 cover closing/opening cycles.

Safety locks are an additional safety element: even when stepping on the very edge of the cover, you can be sure of complete safety.

The colour of the slats and safety locks can be chosen.

All covers comply with the NF P 90-308 safety standard.

You can order either standard 69 mm wide slats or the 2022 novelty: wide 84 mm slats.

Features and distinctions of 84 mm wide slats:

84 mm wide slats – new, flatter and more modern design;

is a block of 4 slats connected to each other by flexible links (less prone to soiling);

the winding diameter is as small as that of 69 mm wide slats;

also have UV protection;

the material also meets the aging resistance requirements defined by the NFT-54-405-1: 2013 standard.

The Rollinside 1 automatic underwater roller cover can be integrated either into a niche in the pool floor or into Roman steps, and the choice of motor type allows the underwater roller cover to be adapted to different pool configurations.

Maximum safety

Safety locks, an essential addition to DEL automatic covers, guarantee that your pool will be fully closed. A wide colour range lets you match the locks to the colour of your slats.

Wi-Key: remote control

Aesthetic and waterproof housing for indoor or outdoor installation. Code lock. Quick and easy to install. Safe use thanks to the lock code and in accordance with the NF P90 308 standard.

New slat design for underwater roller covers

The new design is unique thanks to black joints and caps.

We guarantee the most competitive price on the market

Our manager will confirm availability and delivery time after you place the order.